combined load的例句大全

Tapered roller bearings are generally used to support combined load mainly consisting of radial load.

圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷.

Taper roller bearings are generally used to support combined load mainly consisting of radial load.

详细信息:圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷.

The full stress design of a cantilever beam under a combined load is discussed.

讨论了悬臂梁在联合载荷作用下满应力截面设计问题.

Application of fuzzy comprehensive evaluation for optimizing combined load forecasting

模糊综合评价在负荷最优组合预测中的应用

The experimental study on the mechanical characteristics of crack sample under combined load

组合荷载下裂隙试样力学特性的试验研究

A new type of experimental installation& combined load test-bed

一种新型的实验装置&组合式加载实验台

The Combined Load Management System Model and Construction Technique

负荷管理系统混合组网的体系模型及技术解决方案

Thirdly, the impact of the cornering force of each wheel on direction instability due to load transfer combined with characteristics of tires is also studied.

及通过载荷转移结合轮胎特性所导致的各个车轮上的侧偏力大小对汽车行驶方向失稳影响的研究；

The rule of hook load and friction coefficient is applied to enhance predictive accuracy of frictional drag in new area or different BHAs and heighten utilization ratio of frictional drag. Drag theory can be combined with practice, and drill string mechanics analysis system is supplemented.

利用钩载和摩阻系数的规律性，能够提高新区块或者不同钻具组合摩阻预测的准确性，增强现场施工摩阻的利用率，达到理论结合实际，丰富完善钻柱力学分析体系的目的。

A general eigen function was deduced for computing global buckling load combined with a Rayleigh-Ritz method.

结合Rayleigh-Ritz能量近似法，推导出了求解加筋板总体屈曲载荷的通用特征方程；

Combined with the TCR+ FC compensation plan, the method realizes the goal that power factor of the power supply system is above 0.9 under shock load.

此方法结合TCR+FC的补偿方案，成功实现了该供电系统在冲击性负荷下功率因数大于0.9的目标。

Then the shear bearing capacity of corroded RC deep beams without stirrups is calculated on the basis of a combined resistance of beam action and arch action; and then the formula of the load capacity of corroded RC deep beams without stirrups is suggested.

再在梁-拱共同作用抵抗剪力的机制上，计算了无腹筋锈蚀钢筋混凝土深梁的抗剪承载力，进而提出了无腹筋锈蚀钢筋混凝土深梁的承载力计算公式。

As to deeply understand the slipping performance of wet clutch in engaging process, this dissertation makes deep and systematic research on slipping and thermal load characteristics combined with related experimental study.

为更深入了解湿式离合器在接合滑摩过程中的性能表现，本文结合实际研究项目，对湿式离合器接合过程中的滑摩性能和热负荷性能进行了深入的研究。

By analyzed interactions of combined limit pipe load components, simplified check formula for pipe load strength are put forward and the calculation method of relevant allowable pipe load values based on shell finite element analysis is presented as well.

通过对组合极限接管载荷分量相互关系的分析，提出了接管载荷强度验算简化公式和以壳结构有限元应力分析为基础的许用接管载荷计算方法。

Based on the analysis of cooling capacity and water flow at load side ( surface cooler), provides control strategies for combined chillers with different number and other links.

根据对负荷侧（表冷器）冷量和流量特性的分析，给出不同冷水机组台数组合时的控制方案和其他环节的控制策略。

Based on the means, combining with the characteristic of continuity and day periodicity changing of power loads, a zero addend GM ( 1,1) combined forecasting approach is developed to correct load data of distribution systems.

在此基础上，结合电力负荷呈连续性和日周期性变化的特性，提出了用于负荷数据修正的零加数GM（1,1）组合预测方法。

A traffic load forecast model by optimally combined Markov chain is presented.

提出了一种基于最优组合马尔柯夫链的业务量预测模型.

Combined with specific engineering, it analyzes selection of design plan of torch tower structure from numerous ways, discusses confused problems on calculating control load& wind load of tower structure emphatically and puts forward some improved suggestions.

结合具体的工程实例，从多方面分析了火炬钢塔架结构设计方案的选择，强调论述了塔架结构的控制荷载&风荷载计算中易混淆的问题，并提出了一些改进意见。

The Study of the Diagnostic Value of Strain Rate Imaging ( SRI) Combined with Adenosine Stress for Coronary Artery Disease Load Factor The load factor is the ratio of the average load to the generator set power rating.

腺苷负荷心肌组织应变率显像对冠心病诊断的研究负荷系数负荷系数指的是机组的平均负荷与额定功率之间的比率。